By Sven Ritter-Plazek, Managing Director and Dispatch
For every mounting job, the load capacity of the wall is what decides. With the right anchor and the right adhesive, almost any wall is suitable. All our staff have completed certified anchor-fixing training (Dübelschein) for this.
What the anchor-fixing certification covers
- identifying the type of wall: concrete, masonry, perforated brick, aerated concrete, cavity wall
- assessing load capacity
- choosing the right anchor for the wall in question
- choosing the right adhesive when fixing with injection mortar
- when and how the drill hole has to be blown out and brushed out
Concrete carries high loads. The anchor holds because it expands as the screw is driven in and presses against the drill hole wall.
- 1Drill, in concrete with hammer action
- 2Blow out the drill dust
- 3Set the anchor flush
- 4Drive in the screw: the anchor expands
| Wall | Fixing | Load capacity | Why |
|---|---|---|---|
| Concrete | Expansion anchor, heavy-duty anchor for high loads | high | Concrete carries high loads. The anchor holds because it expands as the screw is driven in and presses against the drill hole wall. |
| Solid brick | Universal or expansion anchor | high | Solid brick and sand-lime brick are massive and load-bearing. An expansion or universal anchor holds securely here. |
| Perforated brick | Injection mortar with mesh sleeve | medium | Perforated bricks have hollow chambers. An expansion anchor would push into empty space. The mortar flows through the mesh sleeve into the chambers and anchors itself there. |
| Aerated concrete | Aerated concrete anchor | medium | Aerated concrete is soft and porous. A normal expansion anchor hardly holds. Aerated concrete anchors grip deep into the material with large ribs. |
| Plasterboard | Cavity anchor, heavy loads into the stud frame | low | Behind the board of a cavity wall there is only air. The cavity anchor opens behind the board and spreads the load. Heavy devices are fixed to the stud frame or a sub-structure. |
Why load capacity decides
A device on the wall pulls on its fixing all the time, and with training equipment the movement during training is added. So what matters is not whether a hole can be drilled, but whether the wall can take the load. We check this before mounting.
Cavity walls and adhesive
Plasterboard cavity walls need special cavity anchors or a fixing to the substructure. In perforated brick and soft masonry, injection mortar is often suitable. The drill hole must be clean first: drilling dust is blown out and brushed out, otherwise the mortar does not bond.
With the right anchor and adhesive, no wall is really a problem. Which combination fits is recorded in the checklist we fill in before every installation.
Quick answers
- What is most important when mounting on a wall?
- The load capacity of the wall. With the right anchor and the right adhesive, almost any wall is suitable.
- Can heavy devices be fixed to plasterboard?
- Cavity anchors hold light loads. Heavy devices are fixed to the stud frame or to a substructure.
- Why is the drill hole brushed out?
- With injection mortar, the drill hole must be free of drilling dust, otherwise the mortar does not bond to the wall.